Preliminary Programme - 10th biennial FOODSIM'2018, April 8-12, 2018, KU Leuven, Ghent, Belgium

Dear Colleague,

Please find hereafter the preliminary programme
for the 10th biennial FOODSIM2018 Conference, which
will be held at the University of Leuven research
Centre, Ghent, Belgium from April 8-12, 2018.

Conference link with extra info is on:
https://www.eurosis.org/conf/foodsim/2018/

The online registration form is linked on:
https://www.eurosis.org/conf/foodsim/2018/email-registration.html

Beware the general timing below is advisory
and can undergo minor changes in the final programme.

Regards
Philippe

Session Timing

Sunday April 8
17.00-21.00 Registration and Get-Together-Party

Monday April 9
08.00-17.00 Registration
09.00-09.30 Welcome Address and Introduction to FOODSIM
09.30-10.30 Keynote
10.30-11.00 Coffee Break
11.00-12.30 Sessions
12.30-13.30 Lunch
13.30-16.00 Sessions/Tutorial
16.00-16.30 Coffee Break
16.30-18.00 Sessions/Workshop
18.00-18.30 Welcome by Daniel Termont, Mayor of Ghent and Luc Sels, Rector KU Leuven
18.30-21.00 Drink and Walking Dinner at the Technical Exhibition

Tuesday April 10
08.30-17.00 Registration
09.00-10.00 Keynote
10.00-10.30 Coffee Break
10.30-12.30 Sessions
12.30-14.00 Lunch
14.00-15.30 Sessions/Tutorial
15.30-16.00 Coffee Break
16.00-18.00 Sessions/Workshop
19.00-20.00 Concert in Sint Baafs Cathedral, Ghent, by Jan Van Impe, KU Leuven

Wednesday April 11
08.30-16.00 Registration
09.00-10.00 Keynote
10.00-10.30 Coffee Break
10.30-12.00 Sessions
12.00-13.00 Lunch
13.00-14.30 Sessions
14.30-15.00 Coffee Break
15.00-16.30 Sessions
16.30-16.45 FOODSIM Closing Session and Best Paper Award
16.45-17.30 Final Drink
18.00-24.00 Conference Dinner

Thursday April 12
09.00-15.00 FOODSIM & TIB Company Visits (Optional at extra cost-limited spaces): Brewery St. Feuillien | Brewery Van honsebrouck | Brewery Eutropius
15.00-15.30 Arrival back at the KU Leuven Technology Campus, Ghent

Keynotes

KEY_01
Constraint-Based Models of Microbial Physiology: surprisingly versatile

Bas Teusink, Bob Planqué, Douwe Molenaar, Frank Bruggeman and all of the www.teusinkbruggemanlab.nl team, Amsterdam Institute of Molecules, Medicines and Systems, Vrije Universiteit Amsterdam, Amsterdam, The Netherlands

KEY_02
Human in the loop for modelling food and biological systems: an original perspective coupling AI and life science

Nathalie MéJean Perrot, Nadia Boukhelifa, Alberto Tonda, Thomas Chabin, Marc Barnabe, Alice Roche, Thierry Thomas-Danguin and Evelyne Lutton, UMR 782 GMPA, Team MALICES and-ECOMIC, INRA, UMR CSGA, Centre des Sciences du Gout et de l'Alimentation, INRA, CNRS, Université de Bourgogne Franche- Comté, Thiverval-Grignon, France

KEY_03
Non-thermal food processing: modelling of processes towards safety, quality, and sustainability

Anet Režek Jambrak, Ilija Djekic and Jan Van Impe

Tutorials

TUT_01
Sustainability in food industry: Towards a unified multi-objective decision making framework

Philippe Nimmegeers, Satyajeet Bhonsale, Carlos André Muñoz López, Ihab Hashem and Jan Van Impe, BioTeC+ & OPTEC & CPMF2, KU Leuven, Ghent, Belgium

TUT_02
Application of dynamic optimization for food systems using Pomodoro: A Tutorial

Satyajeet Bhonsale, Dries Telen, Philippe Nimmegeers and Jan Van Impe, BioTeC+, KU Leuven, Ghent, Belgium

Workshops

E-CAM (www.e-cam2020.eu)
Dr.Donal Mac Kernan, UCD School of Physics, & CASL University College Dublin, Ireland, and Director, CECAM-IRL

SuperPro Designer and SchedulePro
Alexandros Koulouris, PhD, Professor, Dept. of Food Technology Alexander Technological Education Institute of Thessaloniki Thessaloniki, Greece

Sessions

Modeling and Simulation in Sustainable Food Systems Engineering

FOOD_SUSTAIN_03
Position Paper: Needs Analysis and Trends in Sustainable Food Systems within Higher Education

Monika Polanska and Jan Van Impe, BioTeC+, KU Leuven, Ghent, Belgium and Paula Bourke, Dublin Institute of Technology, and Enda Cummins, University College Dublin, Dublin, Ireland and Wolfram Schnäckel, Anhalt University of Applied Sciences, Bernburg, Germany and Vasilis Valdramidis, University of Malta, Msida, Malta

FOOD_SUSTAIN_05
Modelling Multicriteria Argument Networks about reduced Meat Consumption

Nicolas Salliou, Independent research scientist, Donneville, and Rallou Thomopoulos, IATE, Univ Montpellier, INRA, CIRAD, Montpellier SupAgro, INRIA GraphIK,, Montpellier, France

FOOD_SUSTAIN_06
Consumer Demand for Sustainable versus Low-cost Food Products: An Agent-based Modelling Approach

Rallou Thomopoulos, IATE, Univ Montpellier, INRA, CIRAD, Montpellier SupAgro, INRIA GraphIK, Montpellier, France and Serafim Bakalis, University of Nottingham, Nottingham, United Kingdom

FOOD_MULTI_OB_01
Multi-objective optimization of the formulation of barley bread using artificial neural network and genetic algorithm

Predrag Kojic, Faculty of Technology Novi Sad, and Milica Pojic, Institute of Food Technology, Novi Sad, Serbia

FOOD-CHAIN_01
Numerical Study of Airflow and Temperature Distribution in a loaded Cold Store

Pierre Coldrey and Jean Moureh, IRSTEA, Antony Cedex, France

Modeling and Simulation in Quantitative Risk Assessment

FOOD_RISK_01
A Quantitative Human Exposure Assessment Model for Antibiotic Resistant Escherichia Coli through Tap Water Consumption

Eithne O´ Flaherty and Enda Cummins, School of Biosystems and Food Engineering, University College Dublin, Dublin 4, Ireland and José Luis Balcázar, Catalan Institute for Water Research and Carles M. Borrego, Institute of Aquatic Ecology, University of Girona, Spain

FOOD_RISK_03
Modelling the Persistence of Nano Silver through Drinking Water Treatments

David Shevlin and Enda Cummins, Biosystems & Food Engineering, University College Dublin, Dublin, Ireland

FOOD_RISK_05
Quantitative Risk Assessment of Antimicrobials in the Feed to Food Chain.

Rachel Clarke and Enda Cummins, University College Dublin, Dublin, and Mark G Healy, National University Of Ireland, Galway and Owen Fenton, Teagasc, Environmental Research Centre, Co.Wexford, Ireland

NEW_TO_NR_11>FOOD_RISK_06
Next Generation Microbiological Risk Assessment: Next Generation Sequencing (NGS) for the Determination of Fish Flesh Microbiota

Theofania Tsironi, Vassiliki Nefel Simou, Afrodite Mexi, Lougovois Vladimiros, Koussissis Stamatis and Dimitra Houhoula, Technological Educational Institute of Athens, Department of Food Technology, Athens Egaleo, Greece, and Jan F.M. Van Impe, KU Leuven, BioTeC+ - Chemical and Biochemical Process Technology and Control, Ghent, Belgium

Modeling and Simulation in Food Safety and Spoilage

FOOD_SAFE_01
Kinetic Modelling of Scavenger Reactions: Parameter Estimation for a Gallic Acid Based Oxygen Scavenger

Astrid F. Pant, Technical University of Munich, TUM School of Life Sciences Weihenstephan and Matthias Reinelt, Fraunhofer Institute of Process Engineering and Packaging IVV, Freising, Germany

FOOD_SAFE_02
Efficient Data Collection for Modelling the Growth Rate as a Function of the Environmental Conditions

Simen Akkermans, Philippe Nimmegeers and Jan F. Van Impe, BioTeC, OPTEC, CPMF2 , KU Leuven, Ghent, Belgium

FOOD_SAFE_03
The Role of Control Strategies for the Implementation of Food safety in Hospital and Health Units, as a Tool for HACCP Assistants and Simulators

Efstathia Tsakali, BioTec+, KU Leuven, Ghent, Belgium and Olga Gortzi, Department of Food Technology, Institute of Thessaly, Karditsa, and George Boskou and Andreas Souliotis, Department of Nutrition-Dietetitics, Harokopio University, and Dimitrios Timpis and John Tsaknis, Department of Food Technology, Technological Educational of Athens, Athens, Greece

FOOD SAFETY_NEW> FOOD_SAFE_04
Modelling of Temperature, Water Activity and Microbial Growth on the Surface of a Pork Leg during Refrigerated Transportation.

Mouna Merai, Refrigeration Process Engineering Unit-Irstea, Antony, France

FOOD_SAFE_05
Quantitative Anti-Fungal Activity Assessment of ZnO Nanoparticles: Towards the design and development of Novel Air Filtration Systems

Vasilis P. Valdramidis, Davide Sardella, Ruben Gatt, University of Malta, Msida, Malta

FOOD_SAFE_07
Effect of Food Microstructure on Thermal Inactivation Dynamics of Listeria Monocytogenes

Davy Verheyen, Maria Baka and Jan F. Van Impe, KU Leuven, Department of Chemical Engineering, BioTeC+ & OPTEC & CPMF², Ghent, Belgium and Torstein Skåra, Nofima, Stavanger, Norway

FOOD_SAFE_08
A simple Method for growing Pseudomonas Fluorescens Biofilms on a Hydrophobic Polystyrene Surface

Valeria Angarano, Cindy Smet, Maria Baka, Simen Akkermans and Jan Van Impe, BioTeC+, KU Leuven, Ghent, Belgium and Andre Chieffi, Procter&Gamble Newcastle, United Kingdom

FOOD_SAFE_10
Stochastic methods to model bacterial growth and food safety risks: Some perspectives

Míriam R. García and Antonio A. Alonso, Process Engineering, IIM-CSIC, Spain

NEW_TO_NR_12> FOOD_SAFE_12
Growth/No Growth Models of Different Stress adopted and Non Adopted Listeria Monocytogenes Strains

Pantelis Stathopoulos, Dimitra Houhoula, Dimitris Timpis, Spiridin Konteles and Efstathia Tsakali, Technological Educational Institute of Athens, Department of Food Technology, Athens Egaleo, Greece and Jan F.M. Van Impe, KU Leuven, BioTeC+ - Chemical and Biochemical Process Technology and Control, Ghent, Belgium

Modeling and Simulation in Food Process Systems Engineering

FOOD_PROCESS_04
PSE4GUT: Influence of a Low Calories Diet Shift on Gut Microbiota Dynamics ‐ A Process Systems Engineering Approach

Theodora Akritidou, Cindy Smet, Philippe Nimmegeers, Simen Akkermans and Jan F.M. Van Impe, BioTeC‐CPMF2, KU Leuven, Ghent, Belgium

FOOD_PROCESS_06
Simultaneous Data Scaling and Training of Data Driven Regression Models for Quality Control of Batch Processes

Carlos André Muñoz López, Philippe Nimmegeers and Jan Van Impe, BioTeC+, KU Leuven, Ghent, Belgium

FOOD_PROCESS_08
Smart sensors to assess and to anticipate fish quality evolution

Carlos Vilas, Míriam R. García, Eva Balsa-Canto and Antonio A. Alonso, Bioprocess Engineering Group, IIM-CSIC, Vigo, Spain

FOOD_PROCESS_10
Industrial Process design for Microwave Pasteurization of Liquid Foods: A Computational Study

Huseyin Topcam and Ferruh Erdogdu, Department of Food Engineering, Ankara University, Ankara, Turkey

FOOD_PROCESS_11
A coupled CFD-heat transfer model for in-package solid food pasteurization

Clarissa Detomi de Albuquerque, Sébastien Curet, Lionel Boillereaux, GEPEA - ONIRIS - (UMR CNRS 6144), Site de la Géraudière, Nantes cedex 3, France.

FOOD SAFETY_NEW2> FOOD_PROCESS_12
Numerical Modelling of Airflow and Heat Transfer in a vented Pallet of Cheese

Anh Thu Pham, Jean Moureh, Denis Flick, IRSTEA, Génie des Procédés Frigorifiques (GPAN) Antony, AgroParisTech, Inra, Université Paris-Saclay, UMR Ingénierie (GENIAL), Massy, and CNIEL, French Dairy Board ‐ DirAST, Paris, France

NEW_TO_NR2>FOOD_PROCESS_14
Edible Oil Hydrogenation: Revisited Viscosity Prediction for accurate Process Simulation

Pierre Albrand, Anne-Marie Billet, Carine Julcour and Vincent Gerbaud, Université de Toulouse, CNRS, Toulouse, France

Modeling and Simulation in Innovative Food Production and Processing Technologies

INNOV_PROCESS_01
Modelling and Validation of Time Temperature History and Enzyme Inactivation in the Continuous Flow Microwave assisted Pasteurization of Apple Juice

Érica S. Siguemoto, Carmen C. Tadini and Jorge. A. W. Gut, Dept. Chemical Engineering, Escola Politécnica, FoRC / University of São Paulo, São Paulo, Brazil

INNOV_PROCESS_02
A Long-Short-Term Memory Network Model for Biscuit Baking

Alberto Tonda and Nathalie Perrot, UMR 782 GMPA, Team MALICES, INRA, Thiverval-Grignon, France

INNOV_PROCESS_03
On the quantification of the impact of natural antimicrobials on the growth kinetics of Listeria, in co-culture food model systems of various structural complexities

Katherine Costello, Madeleine Bussemaker and Eirini Velliou, BioProChem, and Jorge Gutierrez, University of Surrey, Guildford, United Kingdom and Maria Baka and Jan Van Impe, BioTeC+, KU Leuven, Ghent, Belgium.

INNOV_PROCESS_05
Effect of Xhantan Gum on Physicochemical and Textural Properties of Gluten-Free Batter and Bread

Christian R. Encina-Zelada and José A. Teixeira, University of Minho, and Ursula Gonzales-Barron and Vasco Cadavez, CIMO, Polytechnic Institute of Braganza, Braganza, and Fernando Monteiro, IPB and INESC-TEC, Porto, Portugal

INNOV_PROCESS_07
Creating, Refining and Validating a Model Describing Spatiotemporal Dynamics in Cheese during Ripening

Thorsten Stefan and Christian Kern, University of Hohenheim, Schloss Hohenheim, Stuttgart, Germany

INNOV_PROCESS_09
Influence of Cold Atmospheric Plasma on the Microbial Dynamics of Salmonella Typhimurium during Storage at Different Temperatures

Cindy Smet, Maria Baka and Jan F.M.Van Impe, BioTeC and CPMF2, KU Leuven, Ghent, Belgium, and James Walsh, Department of Electrical Engineering and Electronics, University of Liverpool, Liverpool, United Kingdom and Vasilis Valdramidis, Department of Food Studies and Environmental Health, University of Malta, Msida, Malta

INNOV_PROCESS_10
Influence of Plasma Characteristics on the Efficacy of Cold Atmospheric plasma (CAP) for Inactivation of Biofilms developed by Listeria Monocytogenes and Salmonella Typhimurium

M.Govaert, C.Smet, M.Baka and J.F.M.Van Impe, BioTeC+, OPTEC and CPMF², KU Leuven, Ghent, Belgium

INNOV_PROCESS_12
Modelling Microbiological and Quality Marker Responses to Enhance Cold Plasma Cereal Grain Processing

Dana Ziuzina, Agata Los, Daniela Boehm, Patrick J. Cullen, Paula Bourke, School of Food Science and Environmental Health, Dublin Institute of Technology, Dublin, Ireland and Simen Akkermans and Jan F.M. Van Impe, BioTeC+ - Chemical & Biochemical Process Technology & Control Department of Chemical Engineering
KU Leuven, Gent, Belgium

NEW_TO_NR_09> INNOV_PROCESS_14
Characterization of Fish Based Model Food Systems for Microwave Heating Modeling

Ferruh Erdogdu, Huseyin Topcam and Ozan Altin, Department of Food Engineering, Ankara University, Golbasi Kampusu, Golbasi-Ankara, Turkey and Davy Verheyen, Jan F. Van Impe and Ti Kian Seow, KU Leuven, Department of Chemical Engineering, BioTeC+ & OPTEC & CPMF, Ghent, Belgium and Dagbjørn Skipnes and Torstein Skåra, Nofima, Stavanger, Norway

Multi-scale Modeling Methods

FOOD_MULTI_SCALE_01
A Semi-Automatic Modelling Approach for the Production and Freeze Drying of Lactic Acid Bacteria

Thomas Chabin, Marc Barnabé, Alberto Tonda, Nadia Boukhelifa, Fernanda Fonseca, Eric Dugat-Bony, Hélène Velly, Evelyne Lutton and Nathalie Perrot, UMR 782 GMPA, Team MALICES, INRA, Thiverval-Grignon, France

FOOD_MULTI_SCALE_03
A generalized NURBS Based Dynamic Metabolic ux Analysis Framework: deciphering Intracellular Pathway Activation from Extracellular Measurements

Philippe Nimmegeers, Simen Akkermans, Wouter Gijsen, Dries Telen and Jan Van Impe, BioTeC+ & OPTEC & CPMF2, KU Leuven, Ghent, Belgium

FOOD_MULTI_SCALE_05
Ghost Competition: On the Reliability of Quorum Sensing as an Information Source for Bacterial Species

Ihab Hashem, Philippe Nimmegeers, Satyajeet Bhonsale, Carlos André Muñoz López and Jan Van Impe, KU Leuven, BioTeC+ & OPTEC & CPMF2, Ghent, Belgium

FOOD_MULTI_SCALE_07
Multi-scale Modelling to explain Wine Fermentation

D.Henriques and E.Balsa-Canto, (Bio)process engineering group, IIM-CSIC, Vigo, and R. Minebois, R. Pérez-Torrado and A. Quero, Grupo de Biología de Sistemas en Levaduras de Interés Biotecnológico, IATA-CSIC, Valencia, Spain

FOOD_MULTI_SCALE_08
Two-Equation Oxygen Diffusivity of Apple Cortex Tissue for Multiscale Modeling of Gas Exchange

Siem Janssen, Pieter Verboven and Bart Nicolaï, Department of Biosystems, KU Leuven, Leuven, Belgium and Susana Zorrilla, CONICET, Universidad Nacional del Litoral, Santa Fe, Argentina

NEW_TO_NR_01>FOOD_MULTI_SCALE_10
Estimation of Intrinsic Viscosity of Apple Cells by Numerical Simulation

Artemio Plana-Fattori, Christophe Doursat, Giana Almeida, Gabrielle Moulin, Cassandre Leverrier, Even Ou, and Denis Flick, UMR AgroParisTech, INRA, Université Paris-Saclay, Massy, Paris, France

NEW_TO_NR_6>FOOD_MULTI_SCALE_12
Sodium Nitrite Diffusion Modeling in Pork Meat

Julián A. Gómez, University of Guanajuato, Guanajuato, Mexico, and Neus Sanjuán, José Bon and Gabriela Clemente, Polytechnic University of Valencia, Valencia, Spain

NEW_TO_NR_08> FOOD_MULTI_SCALE_14
Modeling of Microwave Heating in a Cylindrical Cavity System: Effect of Rotation and Sample Location on Temperature Uniformity

Ozan Altin and Ferruh Erdogdu, Department of Food Engineering, Ankara University, Golbasi-Ankara, Turkey and Dagbjørn Skipnes and Torstein Skåra, Nofima, Stavanger, Norway

Modeling and Simulation in Food Business and Economics

FOOD_BUS_01
An Evaluation of the Effect of Different Tempering Conditions on Dark Chocolate Compositions

Jewel Ann Joseph, Jan F.M. Van Impe and Monika Polanska, BioTeC+ & BiFTec, KU Leuven, Ghent, and Jeroen De Paepe and Ellen Huizenga, Cargill R&D Centre, Food Applications ‐ Chocolate, Brussels, Belgium

FOOD_PROCESS_01
Techno-Economic Evaluation of β-Cyclodextrin Production from Cassava Tubers

Nikolaos Vacharakis, Anastasia Louizaki, Chrysi Charalambous, Stylianos Rafaelides and Alexandros Koulouris, Department of Food Technology, Alexander Technological Education Institute, Thessaloniki, Greece

FOOD_PROCESS_02
Modeling a Brewery: Capacity and Cost Analysis

Alexandros Koulouris, Alexander Technological Education Institute, Thessaloniki, Greece and Albert Roussos and Demetri Petrides, Intelligen, Inc., Scotch Plains, USA

Trends in Brewing Programme

Keynotes

IL.01

Global trends in beer consumption and production
Jo Swinnen, KU Leuven, Belgium

IL.02

Alternative grains
To be confirmed

IL.03
Beer & Botanicals

David Grinnell, The Boston Beer Company, USA

IL.04
Change is inevitable, including beer flavor

Charlie Bamforth, University of California, Davis, USA

Sessions

Challenges

IL.05

Draught beer quality

David Quain, University of Nottingham, United Kingdom

AL.01

Freeze crystallization as promising next generation water purification technology

Lars Erlbeck, University of Applied Sciences Mannheim, Germany

AL.02

Applications of optical process spectroscopy in brewing processes

Matthias Rädle, University of Applied Sciences Mannheim, Germany

AL.03

A kinetic framework for predicting beer flavour stability
Paul Hughes, Oregon State University, USA

AL.04
Automatable multi-enzyme measurement in malted barley and predictive models for filterability and fermentability

Claudio Cornaggia, Megazyme, Ireland

Breeding in Brewing-Raw Materials, Microorganisms

IL.06

A systems approach to generate superior beer yeasts
Kevin Verstrepen, KU Leuven, Belgium

AL.05
Enhanced wort fermentation with de novo lager hybrids adapted to high ethanol environment

Kristoffer Krogerus, VTT Technical Research Centre of Finland Ltd, Finland

AL.06

Understanding the impact of mitochondrial functionality and morphology on petite production
Eoin Moynihan, University of Nottingham, United Kingdom

AL.07
Variation within brewing yeast populations

Stephanie Brindley, University of Nottingham, United Kingdom

AL.08
Characteristics of two new huell aroma varieties ‐ no flavour hops this time

Andreas Gahr, Hopfenveredlung St. Johann GmbH, Germany

Hops, Botanicals & Fruits

AL.09
Investigation of the impact of different aromatisation technologies on the coriander derived flavour of craft beers

Gert De Rouck, KU Leuven, Belgium

AL.10
Hidden hop aroma compounds ‐ how to squeeze your hops

Christina Schönberger, Barth-Haas Group, Germany

AL.11
Dry-hopping ‐ techniques, efficiency and economics

Ray Marriott, Totally Natural Solutions Ltd, United Kingdom

Grains

AL.12
The flavour properties of roasted malts: a gas chromatography ‐ olfactometry study

Hebe Parr, University of Nottingham, United Kingdom

AL.13
Alternative raw materials for gluten-free beer

Ombretta Marconi, University of Perugia, Italy

AL.14

Contribution of small and large barley starch granules to maltose production during mashing
Niels Langenaeken, KU Leuven, Belgium

AL.15
Structural change of barley starch during malting and its effects on the production of fermentable sugars

Wenwen Yu, University of Queensland, Australia

AL.16
Effect of malting on commercial green lentils and their suitability for wort production

Jonas Trummer, University of Agriculture in Krakow, Poland

Mircroorganisms in Malting and Fermentation technology

AL.17
Active dry yeast: study of the impact of no hydration before pitching on fermentation

Philippe Janssens, Fermentis, France

AL.18
From kombucha to beer ‐ the application of non-Saccharomyces yeasts isolated from kombucha in the production of a non-alcoholic beer

Konstantin Bellut, University College Cork, Ireland

AL.19
Production of low alcohol and alcohol-free beer with Pichia Kluyveri yeast

Sofie Saerens, Chr. Hansen A/S, Denmark

AL.20
Strong-flavored beers made with the natural hybrid of Saccharomyces cerevisiae x Saccharomyces Kudriavzevii

Sylvie Van Zandycke, Lallemand Brewing, USA

Emerging Beers

IL.07
A walk through wood

William Mitchell, Will and Spirit Limited, Scotland

AL.21
Introducing woody character in craft beer via the use of oak wood extract

Sofie Bossaert, KU Leuven, Belgium

AL.22
The new emerging Italian beer style. The case of Italian Grape Ale

Giovanni De Francesco, University of Perugia, Italy

Processing I

IL.08
Diacetyl, still an issue in lager brewing?

Esko Pajunen, EsConBrew, Finland

AL.23
A flexible malting system that bridges the gap for craft brewers to meet high malting standards

Rob Liedl, NSI Newlands, Canada

AL.24
CAVIBEER®: harnessing the power of hydrodynamic cavitation in the beer sector

Francesco Meneguzzo, Institute of Biometerology, National Research Council, Italy

AL.25
Upscaling of an innovative sustainable boiling technology and validation of the impact on thermal load and volatile composition in wort

David De Schutter, AB Inbev, Belgium

Processing II

AL.26
Thermal treatment versus sterile filtration ‐ a comparison on flavor, microbial safety and energy

Reiner Gaub, Pall GmbH, Germany

AL.27
Tackling the cost of microbial stabilization head on

Daniel Vecsey, Parker Domnick Hunter, United Kingdom

AL.28
Opportunities of hygienic membrane filtration

Jörg Zacharias, KRONES AG, Germany

AL.29
Clarification of rough beer by cross flow microfiltration: application of static turbulence promoter

Áron Varga, Szent István University, Hungary

AL.30
Smart engineering and standardization as catalyst for innovation in the brewing industry ‐ the newest craft beer membrane filter as example

Roland Folz, Pentair Process Technologies, The Netherlands

-
Philippe Geril
EUROSIS -ETI
European Simulation Office
Greenbridge science Park
Ghent University - Ostend Campus
Wetenschapspark 1, Plassendale 1
B-8400 Ostend
Belgium
Tel: OO32.59.255.330
Fax: OO32.59.255339
E-mail: philippe.geril@eurosis.org
E-mail: pgeril@yahoo.co.uk
URL: http://www.eurosis.org
*********************************************************************

* Your Scientific information site on *
* Computer Simulation - Concurrent Engineering - Multimedia- Games *
* WWW.EUROSIS.ORG *

*********************************************************************

THINK BEFORE PRINTING

**** DISCLAIMER ****
"This e-mail and any attachments thereto may contain information
which is confidential and/or protected by intellectual property
rights and are intended for the sole use of the recipient(s) named
above.
Any use of the information contained herein (including, but not
limited to, total or partial reproduction, communication or
distribution in any form) by persons other than the designated
recipient(s) is prohibited.
If you have received this e-mail in error, please notify the sender
either by telephone or by e-mail and delete the material from any
computer.
Thank you for your cooperation."
===============================================================

This email is sent out to all those on the EUROSIS-ETI database.If
you want to be removed from this database or want to update your
address details, please send an email to Philippe.Geril@eurosis.org

===============================================================