ISC 2011, Industrial Simulation Conference, June 6-8, 2011, Centro Culturale Don Orione, Venice, Italy, Preliminary Programme


Preliminary Programme

Session Timing

June 6

08.00-17.00 Registration
09.00-09.15 Welcome
09.15-10.00 Keynote Speaker
10.00-10.30 Coffee Break
10.30-12.30 Sessions
12.30-14.00 Lunch
14.00-15.00 Sessions
15.00-15.30 Coffee Break
15.30-17.30 Sessions
17.30 Free Evening

June 7

08.30-17.00 Registration
09.00-10.00 Invited Speaker
10.00-10.30 Coffee Break
10.30-12.30 Sessions
12.30-14.00 Lunch
14.00-15.00 Sessions
15.00-15.30 Coffee Break
15.30-17.30 Sessions
20.00-23.00 Conference Dinner

June 8

08.30-09.00 Registration
09.00-10.00 Sessions
10.00-10.30 Coffee Break
10.30-12.30 Sessions
12.30-12.45 Closing Session and Best Paper Award

Keynote Speaker

Rigorous Distribution of Stochastic Streams for High Performance Industrial Simulation
Professor David Hill, ISIMA, Universite Blaise Pascal, Aubiere Cedex, France

List of Accepted Papers

SIMULATION TOOLS

TOOL_06
Discrete Simulation Tools Ranking– a Commercial Software Packages comparison based on popularity

Luís M. S. Dias, Guilherme A. B. Pereira, Pavel Vik and José A. Oliveira, University of Minho, Braga, Portugal

TOOL_01
The SIMSED Framework for Modelling and Simulation of Transitic Systems under Uncertain Environment

Romain Bévan Jean Louis Lallican SYDEL Lab-STICC and Willy Allègre and Pascal Berruet, Université de Bretagne-Sud, Lorient Cedex, France

TOOLS_02_ENERG
A Simulation Package for an Energy-Aware Comparison of ARQ Protocols

Simonetta Balsamo, Gian-Luca Dei Rossi, Andrea Marin and Matteo Rosati, Universit`a Ca’ Foscari di Venezia, Venice, Italy

TOOL_03
A Tool to visualize Response Selection and Execution on Pace Rating

Peeradaech Suwittayaruk and Dirk Van Goubergen, Ghent University, Ghent-Zwijnaarde, Belgium and Thurmon E. Lockhart, Virginia Polytechnic and state University, Blacksburg, VA, USA

AUTO_01
Mixed Method for Solving and Characterizing Large Sub-Systems in Modelica

Zakia Benjelloun-Touimi and Hassen Jawhar Hadj Amor, IFP Energies Nouvelles, Rueil-Malmaison Cedex, France and Houssem Saafi , Ecole Nationale d'Ingenieurs de Sousse, Sousse, Tunisia

ENGINEERING SIMULATION

ENGIN_01
Risk management based on fuzzy logic for a Francis turbine

Diego Tobon Mejia and Sophie Hennequin, Ecole Nationale d’Ingénieurs de Metz and Francisco Botero and Nidhal Rezg, UFR MIM - Université Paul Verlaine de Metz, Metz, France and Leonel Castaneda, EAFIT University, Medellín, Colombia

AUTO_02
Preparing a representative dataset by using a workplace for experimental brake systems testing

Tomáš Kohlschütter and Pavel Herout, University of West Bohemia, Plzeň, Czech Republic

ENERG _01
Tuning of Electrohydraulic Rotational Speed Regulators by Means of Real-Time Simulation Techniques

Dragos Daniel Ion Guta, Teodor Costinel Popescu and Petrin Drumea, Hydraulics and Pneumatics Research Institute, INOE 2000 – IHP Bucharest, Romania

MESM
Self-tuning of PID Controllers Model and Simulation Based on Neuro-Predictive Control

Raaed K. Ibrahem, College of Electrical and Electronics Techniques, Baghdad, Iraq

ENGIN_05
Simulation as a Tool for tuning Hydropower Speed Governors

Constantin Calinoiu, Georgiana-Claudia Negoita, Daniela Vasiliu, Nicolae Vasiliu
University Politehnica of Bucharest, Bucharest, Romania

ENERG_02
Experimental Study for Model-based Fault detection in Fluid Power Applications

C. Angeli, Technological Institute of Piraeus, Athens, Greece

MATERIALS SIMULATION

NANO_01_ELEC_03
Interfacial Interactions between Multiwall Carbon Nanotubes and Nylon 6 Polymer Molecules in in-Situ Polymerized Nanocomposites

Y. K. Kim, University of Massachusetts Dartmouth, MA, P. K. Patra, University of Bridgeport, Bridgeport, CT and S. K. Mhetre, Georgia Tech, Atlanta GA, USA

BUILD_01
Finite-Element Simulation of Cold-formed Steel Sigma Section Subjected to Compressed Pin-ended Column

Kitjapat Phuvoravan and Panya Klongaksornkul, Kasetsart University, Bangkhen, Thailand

ELECTRONICS SIMULATION

ELEC_01
A Work on Real-Time Data Dissemination Problem

Mustafa Mujdat Atanak and Atakan Doğan, Anadolu University, Eskisehir, Turkey

COMPLEX_01_ELEC
Reliability Investigation of Retrial Systems with Servers and Station Breakdowns

Nawel Gharbi, University of Sciences and Technology, USTHB, Algiers, Algeria

TRAINING SIMULATION

METH_06
A fuzzy Petri net approach to estimate the learning of skills

Brigitte Finel and Sophie Hennequin, Ecole Nationale d’Ingénieurs de Metz and Nidhal Rezg, UFR MIM - Université Paul Verlaine de Metz, Metz, France

ELEC_02
Training of Fault Diagnosis Skills Use of Heuristic Diagnostic Model and Technical System Simulation

Victor M. Dozortsev and Vladimir A. Nazin, ZAO Honeywell, Moscow, Russia

METH_07_HOS
Modelling a Simulated Pharmacy Patient

P.F. Summons, D. Newby, R. Athauda and M.I. Park, The University of Newcastle, Australia

WEBTEC_01
Web-Based Learning Content Management System of Power Electronics

Valery Vodovozov and Zoja Raud, Tallinn University of Technology, Tallinn, Estonia

GRAPH_02
Using virtual reality for increasing safety in handling cranes: A presence study

Ivan Peteira, Global R&D Asturias, ArcelorMittal R&D, Marta Pla-Castells, University Jaume I, Castellon and Miguel A. Gamon, LSYM - Robotics Institute, University of Valencia, Valencia, Spain

MARKET OPTIMIZATION

METH_04_BIO
Optimization protocol of biochemical networks for effective collaboration between industry representatives, biologists and modellers

Ivars Mozga and Egils Stalidzans, Latvia University of Agriculture, Jelgava, Latvia

ENERG_03
An Evolutionary Optimisation for Electricity Price Responsive Manufacturing

Tobias Kuester Marco Luetzenberger and Daniel Freund, DAI-Labor Berlin, Berlin, Germany

LOGIS_07_HOS
Simulation and Optimization of an Intra-operative Surgery Workflow

Urs Kuenzler, Juergen Eckerle and Robert Hauck, University of Applied Sciences Berne, Switzerland

MANUFACTURING OPTIMIZATION

OPT_03
An Industrial Case Study of Web Based Simulation Optimization

Anna Syberfeldt, Ingemar Karlsson and Amos Ng, Virtual Systems Research Center, University of Skövde, Skövde, Sweden

OPT_01
Applied Framework for Simulation Based Multi-Objective Optimisation within Production System Development

Leif Pehrsson, Volvo Car Corporation,Gothenburg and Amos Ng, The Virtual Systems Research Centre, The University of Skövde, Skövde, Sweden

OPT_04
Optimal Buffer Allocation for Semi-synchronized Automotive Assembly Lines using
Simulation-based Multi-objective Optimization

Jacob Bernedixenand Amos H.C. Ng, Virtual Systems Research Centre, The University of Skövde, Skövde, Sweden

OPT_05
Integrated Optimization and Simulation Models to Scheduling of the Automated Wet-Etch Station in the Semiconductor Industry

Adrián M. Aguirre, Vanina G. Cafaro and Carlos A. Méndez, INTEC (UNL -CONICET), Santa Fe, Argentina

PRODUCTION OPTIMIZATION

MANUF_05
Application of Multiple Criteria Optimization via Simulation to Injection Molding

Maria G. Villarreal-Marroquin and Jose M. Castro, The Ohio State University, Columbus OH, and Mauricio Cabrera-Rios, University of Puerto Rico at Mayagüez, Mayagüez P.R, USA

ELEC_06_OPT
A Comparison of Two Different Approaches to Multi-Criteria Optimization of Semiconductor Fabrication

Ingy A. El-Khouly and Khaled S. El-Kilany, Arab Academy for Science, Technology & Maritime Transport, Alexandria, Egypt and John Geraghty and Paul Young, Dublin City University, Glasnevin, Dublin, Ireland

INDUSTRIAL PLANT SIMULATION

STEEL_02
Design Validation and Flexible Steel Fabrication Facility by Using Discrete Event Simulation

Antonio Avai and Dario Pietraroia, Technology Transfer System srl, Milan and Alessandro Pirovano and Marco Aspesi, Ficep spa, Gazzada Schianno, Italy

MANUF_01
Simulation Based Decision Support System for Cut-to-size Plants

Robert Schoech, Susanne Schmid and Christian Hillbrand, V-Research GmbH, Dornbirn, Austria

MULTIMODAL TRANSPORT SIMULATION

TRANS_05
Predicting Future (E-)Traffic

Marco Lutzenberger, Nils Masuch, Benjamin Hirsch, Axel Hessler and Sahin Albayrak
DAI-Labor Berlin, Berlin, Germany

TRANS_03
A Three Thousand Variable Nonlinear Transportation Problem with Excess Demand

William Conley, Austin E. Cofrin School of Business, University of Wisconsin-Green Bay, Green Bay, WI, U.S.A.

LOGIS_08
A Model for Mystery Shipping in Logistics

Sascha Bioly, Matthias Klumpp and Christof Kandel, FOM University of Applied Sciences, Essen, Germany

LOGIS_09
Simulation of logistic decisions within a freight transportation model

Tabitha Maes, Katrien Ramaekers, An Caris, Gerrit K. Janssens and Tom Bellemans, Hasselt University, Diepenbeek, Belgium

LOGIS_02_TRANS
Multi-Criteria Evaluation of Multi-Modal Traffic Systems by Discrete Event Simulation

Christian Hillbrand and Susanne Schmid, V-Research GmbH, Dornbirn, Austria

CONTAINER TERMINAL SIMULATION

LOGIS_03_TRANS
Improvement of Key Process in a Containers Terminal: An Application of Discrete Simulation

Ileana Perez Vergara and Rosarion Garza Rios, Instituto Superior Politécnico “José Antonio Echeverría, Ciudad de La Habana, Cuba and Hendrik Van Landeghem, Ghent University, Belgium and J. Carlos Valenzuela, Universidad de Cadiz, Cadiz, Spain

LOGIS_06
Layout Planning of LTL Terminals

Uwe Clausen, Ina Goedicke, Larissa Mest and Jan Kaffka, Technische Universität Dortmund, Dortmund, Germany

IN-HOUSE TRANSPORT LOGISTICS

TRANS_06_ROBOT
AGV Control – The Key to Successful Transport Systems with Automated Guided Vehicles in the Production Environment

Sander M. Slagboom, Hans P.M. Veeke, R. van der Stappen and G.Lodewijks, Delft University of Technology, Delft, The Netherlands

LOGIS_10
Forklift free factory: a case study of different transportation systems in the automotive industry

Tim Govaert, Karel Bauters, Veronique Limère and Hendrik Van Landeghem, Ghent University, Zwijnaarde, Belgium

MATERIALS HANDLING

MANUF_08
Simulating Value Chain and Co-operation Practice

Matthias Klumpp and Laura Koppers, FOM University of Applied Sciences, Essen, Germany

MANUF_03
Developing a Flow Simulation Model to Calculate the Minimum withdrawal Kanban and to Analyse Stock Evolution with different scheduling Sequences

José Villanueva Castrillón, Inmaculada del Vigo García and Iñigo Felgueroso Fernández-San Julián, Prodintec Foundation and Pilar Lourdes González Torre, University of Oviedo, Gijón, Spain

MANUF_04
The Impact of Part Characteristics on the Decision of Kitting versus Line Stocking

Veronique Limère, Hendrik Van Landeghem and El-Houssaine Aghezzaf, Ghent University, Ghent-Zwijnaarde, Belgium

MANUF_06
From bulk feeding to full kitting: a practical case in the automotive industry

Karel Bauters, Tim Govaert, Veronique Limère and Hendrik Van Landeghem, University of Ghent, Ghent, Belgium

MANUF_02
Comparing the Performance of POLCA and Load Based Order Release Shop Floor Control Methods using Simulation

H. Van Landeghem, K. De Cock, F. Declerck and P. Verdegem, Ghent University, Ghent, Belgium

ENVIRONMENTAL SIMULATION

METH_02_ENV
The Other Global Warming Problem

William Conley, Austin E. Cofrin School of Business, University of Wisconsin-Green Bay, Green Bay, U.S.A.

METH_01_ENV
Model of the ecological subsystem of the “Kastela Bay”

Ante Munitic and Frane Mitrović, University of Split, Marine Faculty,
Split, Croatia

METH_ENV_03
ECOMONFOR- A System for Greenhouses Monitoring and Forecasting

Janetta Culita, Dan Stefanoiu and Alexandru Dumitrascu, „Politehnica” University of Bucharest, Romania